How I made my Aoi no Exorcist (Shiemi Moriyama) costume

Couple of months back, along with BanditYing and Cvy,  I cosplayed as Moriyama Shiemi from the series, Ao no Exorcist. Here with an entry to share how I made her summer school uniform ^^

I must apologise that as I was in such a rush to make the costume, I didn’t have the luxury of snapping photos at every stage. Henceforth, some parts of the costumes might not be explained in depth. Either way, I hope the entry will help give you a bit of head start if you ever intend to make Shiemi’s School Uniform. Enjoy!








Box Pleated Skirt

Check out this entry to learn how to make a Knife pleated skirt.

Her skirt seemed like a box pleated skirt to me so I folded my pleats in a different way from the video. I used really cheap cotton and very much regretted it after as the skirt was so light the breeze kept bringing it up! Below are some pictures to share how I made the skirt.


Cut 2 long strips of cloth. The width of the skirt would be your skirt length + an extra inch of of edging. Box pleat them and hold the pleats in place with bobby pins.


Sew one side of the pleats down with a loose running stitch.


Sew both pieces together by the side. This will form one long strip of pleated fabric.


Cut off any extra fabric/pleats and then sew the hems.


Now, sew the zip on.


Basically, the pictures above shows how you are supposed to flip the zip to the other side and sew it down. I’m sorry but I don’t know how to explain the zip sewing part … let’s hope the pictures helps >.< ;;;


Make 2 markings (top and bottom of where the zip goes) on the fabric so you will have a visual guide.


Sew it down! If your Sewing Machine has a special footer for zips, then change your footer before sewing. If your machine don’t come with that, it’s fine too. It just takes a little more effort to get it done.


This is how it would look when you’re done. Continue the same steps with the other side of the zip.


After you’re done with the zip, this is roughly how the skirt would look like Open-mouthed smile If you’re rushing for time or if your costume cannot see the band of the skirt, you can even skip the band and stop at this stage.


Length = Waist circumference + 2” (for the overlapping portion at the hook )

Width = 1” (Or how big u want your band to be) x 2 + 1” (extra edging for sewing)

The waist band is a long strip of rectangle fabric. Sew it on to the top of the skirt and you’re done! For more in-depth explanation, read this blog entry.

Collar Ribbon

I made her neck Ribbon by sticking ribbons diagonally on a navy blue fabric.


This is the butterfly ribbon part. The other half of the fabric without any ribbons stuck on will be the underside of the ribbon. Which is why it doesn’t need any ribbon(the red & white ribbons) decoration.

Yep, using too much glue gives a really yucky effect =\


These are the tails of the ribbon. The piece with the lesser ribbons stuck on it is the centre fabric to tie the ribbon and tails together. JIM_5479

To make the collar ribbon lasting, I made sure I hand sew the necessary pieces together to avoid any costume malfunction. For wearing convenience, I then hot glued a big safety pin onto the back of it so I can wear it like a brooch.

Ni-Chan Plushie

I have never made a Plushie before so I was really worried about making her Guardian Demon Prop. But since it was such a simple costume, It felt really unconvincing if I didn’t have her Ni-Chan with her.

Personally, I really like Ni-chan and Shiemi. They are the type that gets overlooked because of their appearance even though both are surprisingly strong and useful!

With some suggestion from a friend, I decided to make my Ni-Chan out of socks. Not the best texture but I guess I could live with it Open-mouthed smile


Drafted the silhouette of Ni-chan on the sock. Sew and then cut it out. Flip it inside out and then stuff it with cotton.


Ni-Chan’s right hand is a darker shade of green hence I used another pair of socks to make his right arm.


I drafted his eyes on paper and cut them out to gauge the proportion. After I’m satisfied with the size and shape of it, I use the paper as a template and cut a similar piece of felt out. I used markers to draw the details of the eyes and then glued them onto the face with fabric glue.

I attempted to mimic the darker colour patches on Ni-Chan by marking it out with a dark green marker but the nylon fabric absorbed most of it =(


To make my Ni-chan more pose friendly, I also inserted wires inside to make him pose-able. A single marble is also inserted into his abdominal to give him weight to sit down firmly.

Belt, Socks and Blouse

The rest of the costume were pretty much store bought =) Bought my belt from Daiso and my opaque tights from a Socks shop in Bishan Junction 8. Hope these information helps!


Again I apologise that this entry might not be very comprehensive but I hope you liked it ! Comment and show me some lovesss!

P/s: The wig I used here belongs to Cvy ^^

No comments:

Post a Comment